Compressor stations are an integral part of the natural gas pipeline network that helps to reduce pressure and maintain flow in transporting natural gas from individual well sites. As natural gas moves through the pipeline, it is slowed by distance, friction and elevation differences. Compressor stations help these issues be resolved strategically placed within gathering or transportation pipelines so they can continue on their journey to market.

Understanding Natural Gas Compressor Stations

Compressor stations are an integral part of the natural gas pipeline network that helps to reduce pressure and maintain flow in transporting natural gas from individual well sites. As natural gas moves through the pipeline, it is slowed by distance, friction and elevation differences. Compressor stations help these issues be resolved strategically placed within gathering or transportation pipelines so they can continue on their journey to market.

Need our Gass Compression Experts on-site? Check out our Services Here

How Compressor Stations Work 

Natural gas enters a compressor station and is cleaned of liquids, solids, and particulates. The natural gas stream then goes through more piping to individual compressors, where computers regulate the number required to handle system requirements. On high-pressure occasions (like when you're cooking), several units can be operated in stages to provide needed pressure on an incremental basis ((Figure 1). When necessary, this process also works from the bottom-up, which provides for a gradual increase in flow at startup as opposed to outputting all available volume immediately upon demand

Natural gas needs to be cooled before leaving a compressor facility to cool down the stream. This happens by compressing it and dissipating heat at 100 PSI increments. Most compressor stations have aerial coolers for this task (after-coolers). The individual units generate heat which is then cooled with sealed radiators similar to those in an automobile engine - these are called 'before' coolers.

In wet gas areas, where the production of natural gas liquids (NGLs) is high, changes in pressure and temperature cause some of the NGLs to fall out. The NGLs that have fallen out are captured in tanks and trucked off-site for future use. It's called natural gasoline or drip gas since it is often used to blend with motor gasoline.

Most compressor stations are fueled by a portion of the natural gas flowing through them; however, there may be locations where all or just some units can only run using electricity primarily for environmental reasons or security reasons like location isolation from society on military bases, etc. Nevertheless, sites explicitly designed for electrical power generation will have different air emissions than those powered by conventional piston engines, which rely on combustion-driven pistons vs turbine-powered compressors driven electrically but emit sound at higher levels due to their design features geared towards acoustic containment rather than engine attenuation via mufflers like human ears do not hear well over long distances.

Stationary compressors are often housed in buildings to facilitate maintenance and sound management. But the newest units may be located one per building, as well. The walls of these buildings generally have insulation for better noise isolation and advanced fan technology that dampens the sound from inside and outside. In recent years, new construction projects have incorporated this design characteristic where local regulations require it; however, they vary significantly in their approaches when not required by law.

Compressor station yards for gathering lines are often larger than transmission line compressors due to multiple pipelines coming into the complex and, in some cases, equipment needed to filter out liquids from gas. Other components of a compressor complex include backup generators, metering equipment (to measure how much natural gas is passing through), and filtration systems that remove impurities like water droplets or dirt particles before it enters the pipeline system. In addition, there may be odorization facilities on-site; these sites will add mercaptan - also known as "sulphurous" chemicals- which provide distinctive sulphurous odours that warn us if there's a leak.

The Permitting and Regulatory Framework

Gathering pipelines are subject to permitting and regulation at the federal or provincial level, while interprovincial transmission systems come under either of these levels depending on the type of pipeline. A gathering line is any pipe that gathers gas from smaller lines in a region; an interstate transmission system is any line that carries gas across multiple provinces. The purpose, not size, defines whether it's a gathering or an intrastate transmission line.

Safety is an integral part of 24/7 Compression and Belair's operations. We are committed to protecting our employees, clients, property, the environment and the public by continually improving our HSE programs, policies and procedures to promote and maintain a culture of safety excellence. 

Compressor Stations within the Gathering System

Gathering lines are smaller diameter pipelines that take natural gas from the wellhead to a processing facility or interconnect with a more extensive pipeline. These gathering lines are regulated at the provincial level, and compressor stations in this system of pipes also fall under regulation. 

Natural gas in a gathering system can arrive at the compressor station with various pressures depending on the force of wells feeding it and how much gas travels from the wellhead to compressors. Regardless of these pressures, the natural gas needs to be regulated or compressed to enter an interstate transmission system at 800-1200 psi (pounds per square inch). Gathering systems have extensive facilities of 6-12 compressors because there are often significant requirements for compression within them. In addition, as more wells are drilled in an area, these buildings need to scale up as more demand for reduction exists. A typical permanent land requirement for a gathering system compressor is 5 acres, but they may exceed this if slopes exist or other factors are considered.

Compressor Stations within the Interstate Transmission System

A transmission pipeline is a wide-diameter, long-distance pipe that brings natural gas from the production area to market. These pipes can sometimes travel clear across the country. The Federal Energy Regulatory Commission has authority over the construction and operation of interprovincial pipelines.

Natural gas within the pipeline is usually pressurized at 800 to 1,200 psi. To ensure that gas flows optimally, it must be periodically compressed and pushed through the pipeline. However, friction and elevation differences slow the gas and reduce pressure, so compressor stations are typically placed 40-70 miles apart along the pipeline to boost pressure for optimal performance. A typical facility may consist of two compressor units (one operational one as backup) with a single building consisting of four acres or less of land required for a permanent location.

Natural gas within an interstate transmission system is generally already pressurized at 800-1200 PSI--to keep it flowing optimally, periodic compression boosts are needed every few miles on most pipelines stretching across states or countries; because they only offer increases in pressures, these facilities generally need much smaller footprints than gathering systems which require more energy-intensive processes like compression boosting; this means you can have compressors spaced about 70mi apart providing their localized benefits without disrupting other parts of your network; when using 50kW generators that recycle excess heat & power production into natural resources.

Learn More From Your Natural Gas Experts

Contact us for more information about our services and book our experts for Gas Compression, Wellheads, Transmission, Reinjection, Storage/Withdrawal, Coal Bed Methane, and Plant Applications.